Wednesday, 7 November 2012

OneTouch™ AT Network Assistant

OneTouch™ AT Network Assistant
Specifications
General
Dimensions (with module and battery installed)10.3 in x 5.3 in x 2.9 in (26.2 cm x 13.5 cm x 7.3 cm)
Weight (with module and battery installed)3.5 lb (1.6 kg)
Display5.7 in (14.5 cm) LCD with projected capacitance touchscreen, 480 x 640 pixels
AC adapterInput: 100-240 Vac, 50-60 Hz, 1.0 A
Output: +15 Vdc, 2.0 A
Battery typeLithium ion battery pack, 7.2 V
Battery lifeApproximately 3-4 hours depending on type of usage
4 hours to charge from 10% capacity to 90% capacity with the unit powered off
MemoryInternal: 2 GB shared between system and user files
SD card: 4 GB, brand and model selected for optimal performance
USB 2.0 type A port: for use with USB mass storage devices
Network ports
Network analysis portsTwo RJ-45 10/100/1000BASE-T Ethernet
Two Small Form-factor Pluggable (SFP) 100BASE-FX/1000BASE-X Ethernet
Management portOne RJ-45 10/100BASE-T Ethernet
Supported network standardsIEEE 10BASE-T, IEEE 100BASE-T, IEEE 1000BASE-T, IEEE 100BASE-FX, IEEE 1000BASE-X
RFCs and standard MIBs used1213, 1231, 1239, 1285, 1493, 1512, 1513, 1643, 1757, 1759, 2021, 2108, 2115, 2127, 2233, 2495, 2515, 2558, 2618, 2737, 2790, 2819, 3592, 3895, 3896, 4188, 4502.
Not for connection to telephone networksThe OneTouch AT analyzer is NOT designed for connection to a telephone network.

The OneTouch AT analyzer is NOT designed for connection to an ISDN line.

Do not connect to a telephone network or ISDN line except through a regulatory agency compliant computer network modem device.
Wi-Fi Adapter
Data rate802.11a: 6/9/12/24/36/48/54 Mbps
802.11b: 1/2/5.5/11 Mbps
802.11g: 6/9/12/24/36/48/54 Mbps
802.11n (20 MHz): MCS0-23, up to 216 Mbps
802.11n (40 MHz): MCS0-23, up to 450 Mbps
Operating frequency2.412 ~ 2.484 GHz (Industrial Scientific Medical Band)
5.170 ~ 5.825 GHz
Security64/128-Bit WEP Key, WPA, WPA2, 802.1X
Transmit output power (±2 dBm tolerance, maximum power will vary by channel and according to individual country regulations)802.11a: 12 dBm ± 2 dBm @ 54 Mbps
802.11b: 17 dBm ± 2 dBm @ 11 Mbps
802.11g: 16 dBm ± 2 dBm @ 54 Mbps
802.11gn HT20: 16 dBm ± 2 dBm @ MCS0
802.11gn HT20: 15 dBm ± 2 dBm @ MCS7
802.11gn HT40: 15 dBm ± 2 dBm @ MCS0
802.11gn HT40: 14 dBm ± 2 dBm @ MCS7
802.11an HT20: 15 dBm ± 2 dBm @ MCS0
802.11an HT20: 12 dBm ± 2 dBm @ MCS7
802.11an HT40: 14 dBm ± 2 dBm @ MCS0
802.11an HT40: 11 dBm ± 2 dBm @ MCS7
Receive sensitivity (±2 dBm tolerance)802.11a: -81 dBm ± 2 dBm @ 54 Mbps
802.11b: -92 dBm ± 2 dBm @ 11 Mbps
802.11g: -82 dBm ± 2 dBm @ 54 Mbps
802.11gn HT20: -79 dBm ± 2 dBm @ MCS7
802.11gn HT40: -76 dBm ± 2 dBm @ MCS7
802.11an HT20: -78 dBm ± 2 dBm @ MCS7
802.11an HT40: -74 dBm ± 2 dBm @ MCS7
Power consumption (typical)Transmit: 80 mA
Receive: 350 mA
Wi-Fi Antennas
Internal Wi-Fi antennasThree internal 2.4 GHz, 1.1 dBi peak, 5 GHz, 3.2 dBi peak antennas supporting 3x3 MIMO technology
External directional antennaAntenna, frequency range 2.4 - 2.5 and 4.9 - 5.9 GHz.
Minimum gain 5.0 dBi peak in the 2.4 GHz band, and 7.0 dBi peak in the 5 GHz band.
External antenna connector (external antenna port is receive-only, no transmit)Reverse SMA
Environmental and regulatory
Operating temperature32°F to 122°F (0°C to 50°C)
Battery charging temperature32°F to 104°F (0°C to 40°C)
Storage temperature-40°F to 160°F (-40°C to 71°C)
-4°F to 122°F (-20°C to 50°C) for periods longer than 1 week
Operating relative humidity (% RH without condensation)5% to 45% at 32°F to 122°F (0°C to 50°C)
5% to 75% at 32°F to 104°F (0°C to 40°C)
5% to 95% at 32°F to 86°F (0°C to 30°C)
Shock and vibrationMeets the requirements of MIL-PRF-28800F for Class 3 Equipment
SafetyCAN/CSA-C22.2 No. 61010-1-04, IEC 61010-1:2001
Operating altitude13,123 ft (4,000 m), 10,500 ft (3,200 m) with ac adapter
Storage altitude39,370 ft (12,000 m)
Pollution degree2
EMCEN 61326-1:2006
Cables
Cable types100 Ω Unshielded Twisted Pair (UTP) LAN cables.
100 Ω Shielded or Screened Twisted Pair (SeTP) LAN cables.
TIA Category 3, 4, 5, 5e, and 6. ISO Class C, D, E and F.
Cable length measurementMeasurable cable lengths are from 3 feet (1 meter) to 656 feet (200 meters).
Accuracy: ± 6 feet (± 2 meters) or 5%, whichever is greater.
Length measurement is based on Nominal Velocity of Propagation (NVP) for CAT 5e cable.
Settings
WiredSpeed, duplex, PoE, 802.1X, IPv4 address, IPv6 address, MAC address (port A can be changed by the user), VLAN, Wait for Rx Frame
Wi-FiBand (2.4 and/or 5 GHz), authorization default, scan or connect, SSID, security, IPv4 address, IPv6 address, MAC address (Wi-Fi adapter can be changed by the user), Transmit Probes
Analysisv1, v2, v3, Slow Discovery
Management portIPv4 address
Language (user interface)Chinese (simplified), English, French, German, Japanese, Portuguese, Russian, Spanish
Network Tests
Receive Rx optical power measurementaccuracy varies by transceiver, typically ± 3.0 dB
InfrastructureOneTouch, cable, link, PoE, nearest switch, nearest AP, DHCP server, DNS server, gateway
Wired Analysishosts, access devices, servers, tools (port scan, add test), sorts
Wi-Fi Analysisnetworks, access points, clients, channels, tools (name, authorization, connect, locate), sorts, show active
ServicesPing (ICMP), connect (TCP), Veri-Fi™, web (HTTP), file (FTP), multicast (IGMP), video (RTSP), email (SMTP)
Testing Tools
Capturefame slice size (64 B to 9600 B), AutoTest capture
Browserport (management/wired/Wi-Fi)
Telnet/SSHUsername/password (for SSH)
TonerIntelliTone™, analog 400 Hz, analog 1 kHz
Flash switch port1s, 2s, 3s
FiberInspector™/Webcamreal time, pause, scale (for fiber), save
File Tools
ProfilesSave, delete, rename, export, import, load
AP authorizationSave, delete, rename, export, import, load
ReportsSave, delete, rename, export, import, view
ScreensSave, delete, rename, export, import, view
Certifications and Compliance
Conformite Europeene. Conforms to the requirements of the European Union and the European Free Trade Association (EFTA).
Listed by the Canadian Standards Association.
Conforms to relevant Australian standards.